![]() I also have no idea what means, but it turns out I don't have to! I did have an issue with the 5GHz WiFi network not showing up a choice anymore on my mac, but I solved that by changing the "channel" is uses from Automatic to one I randomly selected. ![]() (I have no idea what that means) And I could tell Airport to ignore it, or to solve it, use "Bridge Mode" (discussed in this thread). In Airport Utility, it reported I had a "Double NAT" problem. When the new Sonic/ATT Pace modem was hooked up, I simply plugged the Airport Extreme into that and everything worked right away (sort of). I also plugged Apple TV and a BluRay player into the Airport Extreme ethernet ports. That modem did not have WiFi so the Airport Extreme ran my home's wifi network. My old setup - I had Airport Extreme plugged into Comcast cable modem. I’ve put some other handy wireless setting information into Table 2 below.I was able to get my Airport Extreme running with no issues. Other settings that apply to both radios include Country, Multicast rate, Transmit power, WPA group key timeout and SSID block ("Create a closed network"). But both radios have to be Auto or manually set. Note too, that channel selection defaults to Auto, but you can set it manually. You’ll also need to change the 5 GHz radio SSID from its default equal to the 2.4 GHz radio’s if you want to control which band your clients use. However, the guest network (2.4 GHz band only) does have its own security setting. While you get two radios, note that they both share the same security settings. I should note, however, that the new Express is not Wi-Fi Certified, which is unusual for Apple. But I guess lack of supporting 40 MHz mode in 2.4 GHz hasn’t held back AirPort Extremes from being as popular as they are. Given that 40 MHz mode coexistence is supposed to be standard for Wi-Fi Certified 802.11n devices, you’d think that Apple would back off locking out this mode. You also have the ability to put a single IP into DMZ.Īpple has kept the ability to share a USB printer, but opted to not include file sharing from or Time Machine backup to an attached USB drive. There are still no web filtering or inbound / outbound service controls, although you get static port forwarding for single ports or ranges with separate public and private port numbers.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |